Zencar W Pro Smart Wallbox EV Charger 7kW, Adjustable up to 32A

Shop Description

Smart home charging for single-phase homes

The Zencar W Pro 7kW brings the same smart features as the 22kW model to homes with a standard single-phase supply. It charges at up to 7.4kW (32A), enough to fill most EVs overnight, through a built-in 5m cable, and you can lower the current from 32A down to 6A if your circuit needs it.

Key features

• • Up to 7.4kW on single-phase power, current adjustable 6–32A
• • Built-in 5m TPU cable with Type 2, GB/T, Type 1 or NACS plug
• • 3.5-inch LCD showing status, power, time and energy used
• • App control over Wi-Fi and Bluetooth, with daily scheduled charging
• • RFID card access
• • Load balancing so charging doesn't trip your home supply
• • Built-in Type B RCD (30mA AC + 6mA DC) and PEN-fault protection
• • IP66 for indoor or outdoor mounting

Technical specifications

• • Model: Zencar W Pro 7kW, tethered cable
• • Output: AC, single phase
• • Maximum power: 7.4kW
• • Charging current: adjustable 6–32A
• • Voltage: 220–230V AC, 50/60Hz
• • Cable: 5m TPU, fixed
• • Plug options: Type 2, GB/T, Type 1, NACS (Tesla)
• • Residual current protection: Type B RCD, 30mA AC + 6mA DC
• • Protections: over/under-voltage, surge, over-current, over-temperature, leakage, PEN fault
• • Display: 3.5-inch LCD with RGB status light
• • Connectivity: app via Wi-Fi and Bluetooth, RFID, load balancing, OCPP
• • Protection rating: IP66
• • Operating temperature: -20°C to +55°C
• • Dimensions: 200 × 220 × 100 mm
• • Certifications: CE, TÜV

Which W Pro do I need?

This 7kW model suits single-phase homes. With three-phase power and a car that accepts 22kW, choose the Zencar W Pro 22kW; to use your own cable, choose the W Pro Type 2 socket version.

Need help choosing? Message Plugy EV on WhatsApp at +20 115 324 2277.

Frequently asked questions

How long does it take to charge my car?

A 60kWh battery takes roughly 9 hours from empty to full at 7kW, so an overnight charge at home is usually enough. Smaller batteries charge faster.

Will it work with my car?

It works with cars that have a Type 1, Type 2, GB/T or NACS charging port. Most China-spec EVs in Egypt use GB/T, and most European-spec cars use Type 2. Message Plugy EV on WhatsApp at +20 115 324 2277 with your car model and we will confirm before you buy.

What power supply do I need?

A single-phase 220V supply with a circuit and socket rated for 32A. Have a licensed electrician check your wiring before first use.

Does it need installation?

Yes. It mounts on the wall and should be connected to a dedicated circuit by a licensed electrician. Our team can advise on the right setup before you order.

What warranty does it have?

Plugy EV gives a 2-year warranty on this product.

You may also need

• • Zencar W Pro Smart Wallbox EV Charger 22kW, Adjustable up to 32A
• • Quikr Wallbox EV Charger 7kW, 32A
• • Zencar Model E Portable EV Charger 7kW, Adjustable up to 32A