Zencar W Pro Socket Smart Wallbox EV Charger 22kW, Adjustable up to 32A

Shop Description

A smart wallbox you plug any Type 2 cable into

The Zencar W Pro socket version mounts on your wall and supplies up to 22kW from a three-phase supply through a Type 2 socket. With no fixed cable, it works with any car: just use the Type 2 cable that matches your car's port. Control it from the screen, an app or an RFID card.

Key features

• • Up to 22kW on three-phase power, current adjustable 6–32A
• • Type 2 socket: use a Type 2 to GB/T, Type 2, Type 1 or NACS cable
• • 3.5-inch LCD showing status, power, time and energy used
• • App control over Wi-Fi and Bluetooth, with scheduled charging
• • RFID card access to stop unauthorised use
• • Load balancing to protect your home supply
• • Built-in Type B RCD (30mA AC + 6mA DC) and PEN-fault protection
• • IP66 for indoor or outdoor mounting

Technical specifications

• • Model: Zencar W Pro, Type 2 socket version
• • Output: AC, three phase
• • Maximum power: 22kW
• • Charging current: adjustable 6–32A
• • Nominal voltage: 380V AC ±10%, 50/60Hz
• • Connector: Type 2 socket (IEC 62196-2)
• • Residual current protection: Type B RCD, 30mA AC + 6mA DC
• • Protections: over/under-voltage, surge, over-current, over-temperature, leakage, PEN fault
• • Display: 3.5-inch LCD with RGB status light
• • Connectivity: app via Wi-Fi and Bluetooth, RFID, load balancing, OCPP
• • Protection rating: IP66
• • Operating temperature: -20°C to +55°C
• • Dimensions: 200 × 220 × 100 mm
• • Certifications: CE, TÜV

What you need

A three-phase supply for 22kW and a Type 2 cable for your car, such as the Type 2 to GB/T cable or the Type 2 to Type 2 cable. Your car charges at the lower of 22kW and its own on-board charger limit.

Planning an installation? Message Plugy EV on WhatsApp at +20 115 324 2277.

Frequently asked questions

Does it come with a charging cable?

No. It has a Type 2 socket, so you plug in a cable that matches your car: Type 2 to Type 2 for European-spec cars or Type 2 to GB/T for most China-spec cars.

How long does it take to charge my car?

At 22kW a 60kWh battery charges from empty to full in roughly 3 hours, but only if your car's on-board charger accepts 22kW AC. Cars limited to 11kW take about 6 hours, and cars limited to 7kW about 9 hours.

What power supply do I need?

A three-phase 380V to 440V supply rated for 32A per phase. Have a licensed electrician check your wiring before first use.

Does it need installation?

Yes. It mounts on the wall and should be connected to a dedicated circuit by a licensed electrician.

What warranty does it have?

Plugy EV gives a 2-year warranty on this product.

You may also need

• • Zencar EV Charging Cable Type 2 to Type 2, 32A
• • Zencar EV Charging Cable Type 2 to GBT, 32A
• • Zencar W Pro Smart Wallbox EV Charger 22kW, Adjustable up to 32A